材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
論文
凍結成形法で作製した多孔性ジルコニアセラミックスの微細構造に及ぼすPVA添加の影響
糸井 公一塩見 治久
著者情報
ジャーナル フリー

2014 年 63 巻 6 号 p. 437-441

詳細
抄録

Porous ZrO2 ceramic was prepared by a unidirectional freeze casting using aqueous slurries containing PVA. The effects of PVA content on the microstructure of sintered bodies were investigated by a scanning electron microscopy and a mercury intrusion porosimetry. Porous ZrO2 ceramic with continuously long-ranged pore structure was obtained by the unidirectional freeze casting of the aqueous ZrO2 slurry, followed by sublimation of ice and firing at 1400℃ for 1h in air. The PVA loading of the slurry scarcely affected the pore volume of sintered bodies. However, the pore size decreased and the compressive strength increased with increasing PVA loading in the slurry. When PVA was added, branch and ladder structures occurred in pore walls. Therefore, three dimensional pore structures developed due to the increased in the connectivities of the pore walls, resulting in the decrease in pore size and the increase in compressive strength.

著者関連情報
© 2014 日本材料学会
前の記事 次の記事
feedback
Top